As well as our printing services we can complete the process and offer a wide range of mounting options, making us a one stop shop for creative needs. See our range below and click here for our mounting pricelist
Gatorboard is a lightweight board which is strong and resists bowing. It has a polyfoam core, but the facing material is melamine impregnated to give it a hard surface.
Gatorboards are much stronger than ordinary Foamboards and less prone to bowing making them the board of choice for large works, longer term applications and as a premium backing in frames.
We supply Gatorboards in 5, 10 and 20 mm. The 10 and 20 mm comes with a black or white edging as a finish.
Customwood or MDF are wood fibre panels. They are smooth and strong, but heavy. Good as a general-purpose mounting option where weight is not an issue. We supply Customwood in 3, 6, 9 and 12 mm.
Alupanels are aluminium skinned composite boards with a poly core. The aluminium gives these boards great strength, smoothness and archival properties. Alupanels are used in high end archival mounting.
Foamboard is a low cost lightweight board for general purpose mounting and as a backing in frames. It is constructed with paper on both faces and a polyfoam core.
Foamboard is very light and easy to handle and relatively inexpensive, but it is prone to bowing and dents easily. We supply Foamboard in 5 and 10mm.
Styrene (or HIPS) is a low cost flexible backing. It is smooth and doesn’t dent because of its dense makeup. Available in white or black and in 1mm
Forex is a foamed PVC, lightweight and strong, but not entirely rigid. Main applications are in display and point of sale and can also be used short term outdoors. Available in 3 and 5 mm and in white and black. Also available in super oversize 2m x 3m.
Cards (or Screen boards) are a low-cost mounting option most commonly used in point of sale applications. We supply in 0.5, 1 and 2 mm. We also have an archival option in 1.6 mm for art applications.
As well as Black or White there is a complete range of edging colours to complement your work, perhaps a splash of red around the frame will make your image really pop!
Canvas Stretching and Framing
We only print on SIHL 100% cotton canvas and then stretch them over timber frames of exceptional quality and workmanship. Each of our frames are hand assembled and stretched on a robust timber frame to your individual requirement. We can produce very large frames of 3 meters and more and can handle fine details and delicate fabrics. You have the choice of a protective lacquer included in the cost, or a lamination layer to essentially make the work waterproof and protect it from any marks or stains, should you wish additional finishing.
Pixel Perfect can offer a Trim Shadow frame for your Canvas Prints to give it a more finished look. Also known as shadow box frames, these sit neatly with a 5-10mm shadow line between canvas and reverse frames making a great looking finished product.
Hangers, Fixtures, and Fittings
These are our standard hangers for small frames. We use these for frames up to A1 size. Larger frames should be hung from 2 points such as with the Two D Rings or security brackets.
These are very flexible hangers – can be fitted to 2 hooks or screws or hung from a track hanging system. A range of sizes is available for heavier frames.
These can be used as standard hangers fitted over 2 hooks or screws or as security brackets by fitting over 2 screws and sliding sideways.
Lightweight string hangers are a cheap effective method of hanging light weight boards. They work well for Foamboards, Artmounts, Gatorboards, Kapamounts, cards, etc. Holds up to 2 kgs
Wood Hangers consist of a strip of MDF with 2 D Rings and a wire. They are used in heavier or larger foamboards (from 2kgs to 10kgs) and in heavier boards like MDF. Can also be used as 2 D Ring without the wire.
Metal Hangers consists of a metal strip with 2 D Rings and a wire. They hold heavier boards (from 2kgs to 10kgs) and are especially good with Aluminium, Alupanel and Acrylics.
These are D Rings with prongs designed to push in, lock and hold on foamboards. Works on 5mm, 10mm and 20mm boards. They can be attached anywhere on the board and a pair spaced apart does a good job of holding landscape panels securely. Will hold up to 8kgs per pair.
These consist of 2 wooden rails with one edge cut at 45 degrees. One rail is glued to the back of board and other is screwed to wall. The rail on board interlocks to the one on wall and panel sits securely once hung.
This system will hold heavy boards of more then 10kgs and can be designed to hold extra weight by designing the size of the batten. Split Batten systems makes hanging heavy jobs simple. The positioning and fixing is done with the wall batten only. Once wall batten is fixed, the panel is lifted onto the batten.
These consist of 2 metal rails with an interlocking profile. They work in a similar fashion to wooden split battens, but the metal profile is slim line with just a 5mm depth. This provides for little gap between board and wall in situations where minimum separation is desired.
Metal Split Battens also work well with Acrylics, Aluminium and Alupanel as it bonds well to these materials. In addition, they have better archival properties when matching to archival mounts.
U Channel Frames are made from specially designed U-shaped aluminium extrusions with one longer leg and an interlocking profile. They are designed to glue to the back of boards as a hidden backing frame.
These U channel frames are designed to stiffen the board as well as providing the hanging point. Furthermore, they provide spacing from the wall or a floating effect to the finished works. U Channel Frames work with any boards but are especially good with acrylics where there is no ability attach fixings with screws.
U Channel Frames are normally hung from a matching U Channel hanger or rail. These match and lock onto the frame much like a split baton. As an alternative, we can fit 2 D Rings onto the frame.
U Channel frames come in 2 sizes -the small (12mm) size and the large (23mm) size. Large U Channel frames are joined on corners with metal joiners for additional strength